Phones:
+38(067)450-02-80
+38(067)433-92-02
Call me back!
5 мм
5.00 кг
1 package
269.00UAH.

253.00UAH.
упаковок
269.00 UAH.

PURPOSE AND FIELD OF APPLICATION

Electrodes ANO-4 ARS designed for welding structures made of low carbon steels according to ДСТУ 2651 / ГОСТ380 (Ст0, Ст1, Ст2, Ст 3) of all deoxidation degrees "Killed", "Semi-killed", "Rimmed") and ГОСТ 1050-88 (05кп, 08кп, 08пс, 08, 10кп, 10пс, 10, 15кп, 15пс, 15, 20кп, 20пс, 20).

 

 ISO 2560-А- E 38 0 R 1 2

AWS A5.1: E6013

ГОСТ 9466-75

ТУ У 28.7-34142621-007:2012

ТУ BY 490419789.003-2018 (Belarus)

Э46-АНО-4 АРС-Ø-УД 
Е 43 2 (3) Р 21

COATING TYPE

Rutile

 

 

SPECIAL PROPERTIES

Electrodes ANO-4 ARS provide:

• Easy gaps overlapping;

• High level of welding-technological properties, easy welding process, secondary ignition while tacking;

• Good slag crust separation;

• It is allowed to weld an elongated arc over an oxidized surface;

• Easy primary ignition and stable arcing.

 

 

APPLICATION CONDITIONS

Deposition rate factor – 8,5-9,5g / A.hr. Electrode consumption per 1 kg of deposited metal: 1,75 kg.

Designed for welding, corner, butt and fillet joint types on metal with 3-20 mm thickness. Electrodes from 2,5 to 4,0 mm diameter are suitable for welding in all the spatial positions; 5,0 mm diameter – for flat, horizontal and vertical up positions.

 

REDRYING BEFORE WELDING

At normal storage conditions the redrying is not required. In the case of moisture redrying: 120 ± 10 °С 40-60 min. 

CHEMICAL COMPOSITION OF DEPOSITED METAL, %

Mn Si C P S
0,40-0,75 0,15-0,40 ≤ 0,10 ≤ 0,035 ≤ 0,035

MECHANICAL PROPERTIES OF WELD METAL

Tensile strength, MPa Yield strength, MPa Elongation, %

Impact strength, 

J / сm²

+20 ˚С

Absorbed striking energy, J

0 ˚С

470-600 ≥380 ≥22 ≥78 ≥ 47

Welding should be done with DC of any polarity (reverse polarity is recommended, “+” on electrode) or with AC current from a transformer with open-circuit voltage not less than 50V.

PACKAGING DATA

Diameter, mm Length, mm Welding current, A Units per package, pcs Weight of packing, kg
2,50 350 50-90 140-145 2,5
3 350 70-110 95-97  2,5
4 450 110-170 84-87  5
5 450 150-220 55-56   5

 

WELDING POSITIONS

PA PB PC PF

 

PE PD

 

ДСТУ EN ISO 6947 

Blog
Order a call